Formation of diode-like composite membranes
by plasma polymerization
L. I. Kravets, A. B. Gilman, V. Satulu, B. Mitu, G. Dinescu
This paper outlines the method of the polymer ‘diode-like’ composite membranes preparation that possess asymmetry of conductivity in electrolyte solutions (rectification effect) which manifests itself at various orientations of membranes in an electric field. To produce membranes with ‘diode-like’ properties, thin polymer films formed by plasma polymerization of organic precursors were deposited on one side of track-etched membranes from poly(ethylene terephthalate) and polypropylene used as the porous substrate. It is established that principal causes of achieving asymmetric conductivity are the change in the pore geometry due to the essential reduction of their diameter in the layer of the deposited polymer, and the existence in the pores of an interface between the initial membrane and deposited polymer layer. It is shown that in the presence of a polymer layer with hydrophobic nature in composite membranes for description their electrochemical properties, in addition to consideration the electrostatic interaction between the electrolyte ions and the charge existing on the pore walls, the phenomenon of slipping of the electrolyte solution along the hydrophobic surface should also be taken into account. The detected effects indicate a possible way of the composite membranes creating with asymmetry of conductivity that can be used to develop various feedback systems, chemical and biochemical sensors.
Keywords: track-etched membranes, polymer ‘diode-like’ composite membranes, plasma polymerization, asymmetry of conductivity, rectification effect.
Kravets Liubov — Joint Institute for Nuclear Research, Flerov Laboratory of Nuclear Reactions (Joliot-Curie Str. 6, 141980 Dubna, Russia), PhD (eng), senior researcher, specialist in development of methods for obtaining track membranes, nano- and membrane technologies, modification of membranes surface properties by plasma. E-mail: kravets@jinr.ru.
Gilman Alla — Enikolopov Institute of Synthetic Polymer Materials of RAS (Profsoyuznaya Str. 70, 117393 Moscow, Russia), PhD (chem), senior researcher, specialist in technology of ion-plasma processing of materials and coatings, ion-plasma modification of surface properties of polymers, study of properties and structure of nanocomposite materials. E-mail: plasma@ ispm.ru.
Satulu Veronica — National Institute for Laser, Plasma and Radiation Physics (Atomistilor Str. 409, 077125 Magurele, Bucharest, Romania), PhD (phys), researcher, specialist in surface modification of polymer materials in plasma, polymerization in plasma, formation of nanocomposite materials in plasma. E-mail: veronica.satulu@infim.ro.
Mitu Bogdana — National Institute for Laser, Plasma and Radiation Physics (Atomistilor Str. 409, 077125 Magurele, Bucharest, Romania), PhD (phys), senior researcher, specialist in lowtemperature plasma, technology of ion-plasma treatment in plasma, formation of functional organic and inorganic coatings in plasma. E-mail: mitub@infim.ro.
Dinescu Gheorghe — National Institute for Laser, Plasma and Radiation Physics (Atomistilor Str. 409, 077125 Magurele, Bucharest, Romania), DrSci (phys), professor, head of laboratory, specialist in fundamental processes in plasma, physics and diagnostics of plasma, development of new materials for nanotechnology, environment, biology and medicine. E-mail: dinescug@infim.ro.
Reference citing
Kravets L. I., Gilman A. B., Satulu V., Mitu B., Dinescu G. Formirovanie ‘diode-like’ kompozitnyh membran metodom polimerizacii v plazme [Formation of diode-like composite membranes by plasma polymerization]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 5 – 21.
Features of physical and mechanical properties
of ultrafine-grained 1560 Al – Mg alloy
V. A. Krasnoveikin, A. A. Kozulin, V. A. Skripnyak,
E. N. Moskvichev, D. V. Lychagin
The research explores the influence of severe plastic deformation on the physical and mechanical properties of ultrafine-grained 1560 Al – 7 Mg-based alloy, which was processed by the methods of equal-channel angular pressing. A non-destructive testing technique based on three-dimensional X-ray tomography and ultrasonic inspection was suggested for detecting internal structural defects and monitoring damage formation in the alloy structure after processing. The microstructure of the studied material was analyzed to determine the shape and size distributions of grains in the volume. The grain size distribution in the as-received alloy varied in the range from 4 to 400 µm, and the average grain size was equal to about 50 µm. After four pressing passes, a more uniform structure was obtained within the bulk with the average grain size about 3 μm. Microhardness tests and uniaxial tensile tests under quasi-static loading were conducted to investigate the mechanical properties of the alloy in the as-received condition and after severe plastic deformation. The average microhardness of the material increased after treatment from 1000 to 1600 MPa in the entire volume of blocks. According to tensile test data, the yield strength and ultimate tensile strength increased after four stages of treatment from 150 to 270 MPa and 320 to 460 MPa, respectively. All experimental data prove that severe plastic deformation in optimal treatment conditions enhances the strength characteristics of structural 1560 alloy.
Keywords: aluminum alloy, grain structure, mechanical properties, severe plastic deformation.
Krasnoveikin Vladimir — Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (2/4, pr. Akademicheskii, Tomsk, 634021, Russia), PhD., junior research staff; National research Tomsk State University (634050, Tomsk Lenina Avenue, 36), engineer, specialist in the field of materials science of metal and light alloys. E-mail: volodia74ms@yandex.ru.
Kozulin Alexander — National research Tomsk State University, Faculty of Physics and Engineering (634050, Tomsk Lenina Avenue, 36), PhD., associate professor, specialist in the field of materials science and deformable solids mechanics. E-mail: kozulyn@ftf.tsu.ru.
Skripnyak Vladimir — National research Tomsk State University, Faculty of Physics and Engineering (634050, Tomsk Lenina Avenue, 36), DrSci, professor, head of Department, specialist in the field of materials science and deformable solids mechanics. E-mail: skrp@ftf.tsu.ru.
Moskvichev Evgeny — National research Tomsk State University, Faculty of Physics and Engineering (634050, Tomsk Lenina Avenue, 36), PhD student, specialist in the field of materials science and deformable solids mechanics. E-mail: em_tsu@mail.ru.
Lychagin Dmitry — National research Tomsk State University, Faculty of Geology and Geography (634050, Tomsk Lenina Avenue, 36), DrSci, professor, head of Department; National research Tomsk Polytechnic University (30 Lenin Avenue, Tomsk, 634050), professor, specialist in the field of strength and plasticity physics. E-mail: dvl-tomsk@mail.RU.
Reference citing
Krasnoveikin V. A., Kozulin A. A., Skripnyak V. A., Moskvichev E. N., Lychagin D. V. Osobennosti fiziko-mekhanicheskih svojstv ul'tramelkozernistogo alyuminij-magnievogo splava 1560 [Features of physical and mechanical properties of ultrafine-grained 1560 Al – Mg alloy]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 22 – 29.
Hyperbranched functionalized polyesters for the creation
of promising chemo-modified sorbents
M. Ya. Shigapov, A. R. Gataulina, A. V. Gerasimov,
N. A. Ulahovich, M. P. Kutyreva
This work presents the procedure of preparation and the physicochemical characteristics of new chemo-modified sorbent based on NaX zeolite and hyperbranched polyester polycarbamate. The procedure for preliminary activation of the zeolite surface by NaOH solution allows to optimize the process of immobilization of hyperbranched polyester polycarbamate on the zeolite surface. The increase in the sorption capacity of a new chemo-modified sorbent with respect to Cu (II) ions in model solutions has been proved. Obtained data will allow to develop the sorption extraction technology of rare earth metals ions from objects of ecological control.
Keywords: modified sorbent, hyperbranched polymer, zeolite, adsorption.
Shigapov Marsel — Kazan (Volga region) Federal University (18 Kremlyovskaya street, Kazan 420008, RF), postgraduate student, specialist in inorganic and coordination chemistry. E-mail: Marsel172@yandex.ru.
Gataulina Alfiya — Kazan (Volga region) Federal University (18 Kremlyovskaya street, Kazan 420008, RF), PhD (chem), associated professor, specialist in organic, inorganic and coordination chemistry. E-mail: Alfiya.Gataulina@kpfu.ru.
Gerasimov Aleksandr — Kazan (Volga region) Federal University (18 Kremlyovskaya street, Kazan 420008, RF), PhD (chem), specialist in physical chemistry. E-mail: Alexander.Gerasimov@kpfu.ru.
Ulakhovich Nikolay — Kazan (Volga region) Federal University (18 Kremlyovskaya street, Kazan 420008, RF), DrSci (chem), professor, specialist in organic, inorganic and coordination chemistry. E-mail: Nikolay.Ulakhovich@kpfu.ru.
Kutyreva Marianna — Kazan (Volga region) Federal University (18 Kremlyovskaya street, Kazan 420008, RF), PhD (chem), associated professor, specialist in organic, inorganic and coordination chemistry. E-mail: Marianna.Kutyreva@kpfu.RU.
Reference citing
Shigapov M. Ya., Gataulina A. R., Gerasimov A. V., Ulahovich N. A., Kutyreva M. P. Giperrazvetvlennye funkcionalizirovannye poliehfiry dlya sozdaniya perspektivnyh hemomodificirovannyh sorbentov [Hyperbranched functionalized polyesters for the creation of promising chemo-modified sorbents]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 30 – 39.
Synthetic wollastonite-based material and its effect
on the functional properties of fine-grained concrete
P. S. Gordienko, S. B. Yarusova, A. V. Kozin, V. V. Ivin,
V. E. Silantiev, P. Yu. Lizunova, K. O. Shornikov
In article we present the results of research concerning influence of additive on the basis of synthetic wollastonite obtained by autoclave method from boric acid production waste (borogypsum) on the functional properties of concrete (strength, frost-resistance and water absorption). The phase composition and morphology of the obtained material were studied. It was found that the phase composition of the obtained material after autoclaving and subsequent annealing at 1200 °C is characterized by the presence of crystalline phases of pseudowollastonite, wollastonite and calcium sulfate. It was shown that the 3.5 wt. % wollastonite-based addition leads to increase the strength of fine-grained concrete (compressive strength to 26 % and bending strength to 46 %) and decrease the water absorption of the samples by mass and volume almost twofold. It was found that the 3 – 3,5 wt. % wollastonite-based addition leads to increase the number of alternating freezing and thawing cycles of concrete. It indicates the increasing of its frostresistance.
Key words: wollastonite, borogypsum, concrete, strength, frost-resistance and water absorption.
Gordienko Pavel — Institute of Chemistry of Far-Eastern Branch of Russian Academy of Sciences (Vladivostok, 690022, Prospekt 100-letya Vladivostoka, 159), Dr Sci, professor, head of the Laboratory of protecting coatings and sea corrosion, specialist in the development of physical and chemical foundations of the protective coatings formation on metals and alloys, in the field of complex processing of mineral raw and industrial wastes of Russian Far East region. E-mail: pavel.gordienko@mail.ru.
Yarusova Sofya — Institute of Chemistry, Far-Eastern Branch of Russian Academy of Sciences (Vladivostok, 690022, Prospekt 100-letya Vladivostoka, 159); Vladivostok State University of Economics and Service (Vladivostok, 690014, Gogolya street, 41), PhD, senior researcher of laboratory of protecting coatings and sea corrosion, head of Department of ecology and environmental problems of chemical engineering, specialist in mineral and technogenic raw materials complex processing, preparation and practical application of silicate materials, including materials for construction industry and sorption technologies. E-mail: yarusova_10@mail.ru.
Kozin Andrey — Far-Eastern Federal University (Vladivostok, 690091, Sukhanova street, 8), head of laboratory of department of Construction and Real Estate Management, School of Engineering, Far-Eastern Federal University, specialist in structural materials functional properties. E-mail: prosek@mail.ru.
Ivin Vitaly — Far-East Geological Institute, Far-Eastern Branch of Russian Academy of Sciences (Vladivostok, 690022, Prospekt 100-letya Vladivostoka, 159), PhD, senior researcher of laboratory of Minerageny of precious metals, specialist in the field of geology and environmental problems of complex processing of technogenic structures in the Primorsky Territory. E-mail: ivin_vv@mail.ru.
Silantiev Vladimir — Institute of Chemistry, Far-Eastern Branch of Russian Academy of Sciences (Vladivostok, 690022, Prospekt 100-letya Vladivostoka, 159), research fellow of laboratory of Colloid systems and interfacial processes, specialist in the field of colloid chemistry. E-mail: vladimir.silantyev@gmail.com.
Lizunova Polina — Institute of Chemistry, Far-Eastern Branch of Russian Academy of Sciences (Vladivostok, 690022, Prospekt 100-letya Vladivostoka, 159), process engineer of Promising technologies group, specialist in the field of supercritical synthesis of nanomaterials and ecology. E-mail: polina-lizunova@mail.ru.
Shornikov Kirill — Vladivostok State University of Economics and Service (Vladivostok, 690014, Gogolya street, 41), undergraduate of 2nd year, department of Tourism and Ecology, specialist in the field of ecology and environmental protection. E-mail: rebus-1515@inbox.ru.
Reference citing
Gordienko P. S., Yarusova S. B., Kozin A. V., Ivin V. V.,
Silantiev V. E., Lizunova P. Yu., Shornikov K. O. Material na osnove sinteticheskogo vollastonita i ego vliyanie na funkcional'nye svojstva melkozernistogo betona [Synthetic wollastonite-based material and its effect on the functional properties of fine-grained concrete]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 40 – 48.
Carbon nanotubes for improving the antifriction
properties of motor oils
I. V. Zaporotskova, I. V. Arkharova
A method is proposed for improving the antifriction characteristics of motor oils by introducing carbon nanotubes into its composition. The technique, conditions and results of the experiment with the discussion are considered in the article. The purpose of this work was to develop a method for increasing the efficiency of the oil composition by introducing an additive containing multilayer carbon nanotubes (MWNTs) in various concentrations (0.01, 0.1, and 0.5 wt.%) into the motor oil and studying the effect of carbon nanotubes, introduced as an additive, on the index of antifriction properties of the resulting lubricating compositions — coefficient of friction. As a lubricating medium, various motor oils were selected: on a mineral basis — Lukoil Standard 10W-40 SF/CC; On a partially synthetic basis — Lukoil Lux 5w-40 SL/CF; On a synthetic basis — Lukoil Lux 5w-40 SN/CF. Tests of oils were carried out on a universal friction machine MTU-01 (TU 4271-001-29034600-2004), which is designed for testing friction and wear of metallic and non-metallic materials under the conditions of various lubricating media. The obtained experimental results showed that the introduction of multi-walled carbon nanotubes at low concentrations into engine oils has a positive effect on their antifriction characteristics, which in turn will reduce the energy costs of the idle drive of the machine elements by reducing the coefficient of friction.
Keywords: Carbon nanotubes, lubricant additives, antifriction properties, friction coefficient, friction test machine.
Zaporotskova Irina — Volgograd State University (Volgograd, 400062, Universitetskiy prospect 100), Dr Sci (Phys-Math), professor, director of Priority Technologies Institute, Volgograd State University, E-mail: irinazaporotskova@gmail.com.
Arkharova Irina — Volgograd State University (Volgograd, 400062, Universitetskiy prospect 100), Postgraduate student of Forensic expertise and physical materials science department, E-mail: arkharova_irina@mail.RU.
Reference citing
Zaporotskova I. V., Arkharova I. V. Uglerodnye nanotrubki dlya uluchsheniya antifrikcionnyh svojstv motornyh masel [Carbon nanotubes for improving the antifriction properties of motor oils]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 49 – 54.
Synthesis of membranes in the combustion mode for the process of steam reforming of dimethyl ether
V. I. Uvarov, V. E. Loryan, S. V. Uvarov, V. S. Shustov,
M. V. Tsodikov, A. S. Fedotov, D. O. Antonov, M. I. Alymov
The new generation porous metal-ceramic membranes have been developed by the SHS method in vacuum from a mixture of a large nickel powder (average particle size is 100 μm) and fine powders of cobalt oxide Co3O4 (average particle size is 10-15 nm) and aluminum (average particle size is 5 – 10 μm). During the synthesis, the membrane frame is formed from large particle fractions with open pores of 2,6 – 5,1 μm in size, which leads to an increase in membrane permeability and a large expenditure of the substrate. As a result, porous metal-ceramic catalytically active membranes containing nickel and cobalt nanoparticles with a size of 10 – 20 nm in surface pore layers have been obtained. It have found that the complete conversion of dimethyl ether (DME) is achieved at a temperature of 450 °C to obtain synthesis gas and ultrapure hydrogen.
Key words: ceramics, nickel and cobalt nanoparticles, membrane, microstructure, temperature, combustion, self-propagating high-temperature synthesis (SHS), segregation of charge elements.
Uvarov Valery — Institute of Structural Macrokinetics and Materials Science RAS (142432, Moscow Region, Chernogolovka, Academician Osipyan str., 8, ISMAN), senior researcher, PhD (eng), specialist in self-propagating high-temperature synthesis and materials science. E-mail: uvar@ism.ac.ru.
Laurian Vazgen — Institute of Structural Macrokinetics and Materials Science RAS (142432, Moscow Region, Chernogolovka, Academician Osipyan str., 8, ISMAN), head of the Laboratory, DrSci (eng), specialist in self-propagating high-temperature synthesis and materials science. E-mail: loryan@ism.ac.ru.
Uvarov Sergey — Institute of Structural Macrokinetics and Materials Science RAS (142432, Moscow Region, Chernogolovka, Academician Osipyan str., 8, ISMAN), engineer, PhD (eng), specialist in self-propagating high-temperature synthesis and materials science. E-mail: /uvar@ism.ac.ru.
Shustov Vadim — Institute of Structural Macrokinetics and Materials Science RAS (142432, Moscow Region, Chernogolovka, Academician Osipyan str., 8, ISMAN), junior researcher, PhD (eng), specialist in powder metallurgy and strength physics. E-mail: _Nemo_73@mail.ru.
Tsodikov Mark — A.V.Topchiev Institute of Petrochemical Synthesis RAS (Moscow, 119991, Leninsky prospect, 29, TIPS RAS), head of the laboratory, DrSci (chem), professor, specialist in catalytic nanotechnology. E-mail: tsodikov@ips.ac.ru.
Fedotov Alexey — A.V.Topchiev Institute of Petrochemical Synthesis RAS (Moscow, 119991, Leninsky prospect, 29, TIPS RAS), senior researcher, PhD in Chemistry, specialist in chemical technologies of organic materials. E-mail: alexey.fedotov@ips.ac.ru.
Antonov Dmitry — A.V.Topchiev Institute of Petrochemical Synthesis RAS (Moscow, 119991, Leninsky prospect, 29, TIPS RAS), junior researcher, PhD (Chem), specialist in petrochemistry and membrane technology. E-mail: d.antonov@ips.ac.ru.
Alymov Mikhail — Institute of Structural Macrokinetics and Materials Science RAS (142432, Moscow Region, Chernogolovka, Academician Osipyan str., 8, ISMAN), director, DrSci (eng), professor, corresponding member of RAS, specialist in the field of powder metallurgy and nanotechnology. E-mail: alymov@ism.ac.RU.
Reference citing
Uvarov V. I., Loryan V. E., Uvarov S. V., Shustov V. S., Tsodikov M. V.,
Fedotov A. S., Antonov D. O., Alymov M. I. Sintez v rezhime goreniya membrany dlya processa parovogo riforminga dimetilovogo ehfira [Synthesis of membranes in the combustion mode for the process of steam reforming of dimethyl ether]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 55 – 61.
Influence of technological mode of injection molding
on the strength properties of nanocomposites
based on polyolefins
N. T. Kakhramanov, N. B. Arzumanova, V. S. Osipchik,
J. N. Gahramanly, R. V. Kurbanova, F. M. Alieva, S. S. Alieva
The introduction of nanosized natural minerals of Azerbaijan — vesuviane and clinoptilolite into the composition of such understudied polyolefins as statistical (random) ethylene-propylene copolymer and ethylene-propylene block copolymer for the first time is allowed to discover new possibilities for obtaining bifunctional nano-composites based on them. Bifunctionality is expressed not only in the possibility of obtaining highly filled nanocomposites with improved strength properties, but also in a significant increase in the melt flow index, which improves their processability. Scientific based arguments explaining the reasons for improving the flowability of the melt of nanocomposites in comparison with the initial polymer matrix is shown. In this connection, the influence of technological parameters of injection molding and concentration of mineral filler on strength characteristics and volumetric shrinkage of nanocomposites is described.
Keywords: nanocomposite, vesuviane, clinoptilolite, melt flow, filler.
Kahramanov Najaf Tofig — Institute of Polymer Materials of ANAS (AZ5004, Azerbaijan Republic, Sumgait, S.Vurgun str., 124), DrSci (Chem), professor, head of the laboratory of Mechanochemical modification and processing of polymers, specialist in the area of polymer modification with fillers, obtaining compatible polymer-polymer blends, chemical modification of polymers, establishing the relationship between structure and properties of the polymeric materials. E-mail: najaf1946@rambler.ru.
Arzumanova Nushaba Baba — Institute of Polymer Materials of ANAS (AZ5004, Azerbaijan Republic, Sumgait, S.Vurgun str., 124), research associate of laboratory of Mechanochemical modification and processing of polymers, specialist in the area of mechano-chemical modification of polymers with mineral fillers. E-mail: arzumanova-nushaba@rambler.ru.
Osipchik Vladimir — D. Mendeleev University of Chemical Technology of Russia (125047 Moscow, Miusskaya sq., 9), DrSci (eng), professor, head of the department of Polymer processing technology, specialist in the area of chemistry and technology of preparation and study of composite polymer materials, plastic processing technology. E-mail: vosip@muctr.ru.
Gahramanly Junis Najaf — Azerbaijan State Oil and Industrial University (Azerbaijan Republic, Baku, Nizami str., 117), DrSci (Eng), associate professor, head of the department, specialist in the area of composite materials, development and preparation of foamed-polymer sorbents. E-mail: yunis1m@yahoo.com.
Kurbanova Rena Vagif — Azerbaijan State Oil and Industrial University (Azerbaijan Republic, Baku, Nizami str., 117), PhD in Chemistry, associate professor, specialist in the area of development and preparation of foamed-polymer sorbents. E-mail: rena06.72@yandex.ru.
Alieva Farida Mikayil — Institute of Polymer Materials of ANAS (AZ5004, Azerbaijan Republic, Sumgait, S.Vurgun str., 124), PhD in Chemistry, senior research assistant of the laboratory of Mechanochemical modification and processing of polymers, specialist in the area of polymer modification with fillers.
Alieva Sevda Safarali — Institute of Polymer Materials of ANAS (AZ5004, Azerbaijan Republic, Sumgait, S.Vurgun str., 124), engineer of the laboratory of Mechanochemical modification and processing of polymers, specialist in the area of polymer modification with fillers.
Reference citing
Kakhramanov N. T., Arzumanova N. B., Osipchik V. S., Gahramanly J. N., Kurbanova R. V., F. M. Alieva, Alieva S. S. Vliyanie tekhnologicheskogo rezhima lit'ya pod davleniem na prochnostnye svojstva nanokompozitov na osnove poliolefinov [Influence of technological mode of injection molding on the strength properties of nanocomposites based on polyolefins]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 62 – 71.
Mechanical properties, deformation regularities
and mechanism of destruction of superinvar subjected
to deformation by processing combined method
A. M. Ivanov
In work the question of deformation processing of a superinvar 32NKD by the combined method of extrusion and screw pressing (ESP) in one pass is considered at a temperature of 293 of K is considered. Increase of strength of a superinvar at influence by means of ESP is shown, the analysis of characteristics of the conventional diagram of deformation has been carried out, research of influence of the combined deformation processing on the mechanism of destruction of a superinvar 32NKD in the conditions of temperature of tests on monoaxial stretching of 293 and 213 K. Determined that the low-temperature strength of the milled alloy is higher in comparison with its strength at the room temperature. At qualitative similarity of the mechanism of destruction (ductile character) of specimens from a superinvar 32NKD in an initial state and the alloy which is able after ESP in the conditions of room temperature and strengthened alloy at a low temperature (213 K) distinction consists in quantitative characteristics of a surface of destruction.
Keywords: superinvar, deformation, destruction, strength, kink, fractography.
Ivanov Afanasiy — V.P. Larionov Institute of Physical and Technical Problems of the North Russian Academy of Sciences, Siberian Branch (1, Oktyabrskaya St., Yakutsk, 677980, Russian Federation), PhD (eng), leading researcher, specialist in the field of development of methods of severe plastic deformation, development of methods and research strength, ductility and fracture of structural and nanocrystalline metallic materials. E-mail: a.m.ivanov@iptpn.ysn.RU.
Reference citing
Ivanov A. M. Mekhanicheskie svojstva, zakonomernosti deformirovaniya i mekhanizm razrusheniya superinvara, podvergnutogo deformacionnoj obrabotke kombinirovannym metodom [Mechanical properties, deformation regularities and mechanism of destruction of superinvar subjected to deformation by processing combined method]. Perspektivnye Materialy — Advanced Materials (in Russ), 2017, no. 9, pp. 72 – 80.
